Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Ramsgate

From the CT11 postcode district outwards, we cover Ramsgate for industrial roller shutter doors, with planning and power checked at survey.

In Ramsgate, industrial roller shutter doors typically cost £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • CT11 and nearby
  • Kent
  • England
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How industrial roller shutter doors work, and what to ask for

Insulated laths reduce heat loss at loading bays and help temperature-controlled stock. Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles.

Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives. Bump protection, bollards and guide-rail guards reduce damage from vehicles.

What's included

  • Wicket doors and vision panels
  • Galvanised steel or insulated laths
  • Single or three-phase drives
  • Direct-drive and chain motors for heavy use
  • Safety edges, photocells and light curtains
  • Guide guards and bollards against impact
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Ramsgate

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Ramsgate and surrounding towns

Jobs in Ramsgate are planned as part of our Kent coverage, and visits can be combined with jobs in nearby Broadstairs, Margate and Deal. Planning rules are those of your local council in England.

Rules in England

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Your questions answered

Do you cover Ramsgate?

Yes. Send the postcode and we will arrange a survey in Ramsgate. We also cover nearby Broadstairs, Margate and Deal.

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

Can you fit a door with a pedestrian door in it?

Yes. Wicket doors can be built into many industrial shutters, although they need interlocks so the curtain cannot move while the wicket is open.

Do industrial doors need a three-phase supply?

Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.

Do your guide prices include VAT?

Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.

Will you take away my old shutter?

Yes. Removal and disposal of an old shutter is included when we quote for a replacement.

Also available in Ramsgate

See everything we do in Ramsgate, across Kent, or read about industrial roller shutter doors.

Get a fixed price in Ramsgate

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248