Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Merthyr Tydfil

Made-to-measure industrial roller shutter doors for warehouses, factories and workshops in Merthyr Tydfil and the wider CF47 area, with a free survey and a fixed price in writing.

Expect industrial roller shutter doors in Merthyr Tydfil to start from £2,495 ex VAT (£2,994 inc VAT). Larger openings, insulated or rated laths, colours and motors move the price towards the top of the range.

  • CF47 and nearby
  • Mid Glamorgan
  • Wales
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

Industrial roller shutter doors in Merthyr Tydfil: the essentials

Timers, induction loops and push-button stations can be added for busy loading bays. Wind locks and deep guides stop wide curtains bowing out of their guides in strong winds.

Bump protection, bollards and guide-rail guards reduce damage from vehicles. Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles.

Specification options

  • Wind locks and deep guide rails
  • Single or three-phase drives
  • Safety edges, photocells and light curtains
  • Wicket doors and vision panels
  • Direct-drive and chain motors for heavy use
  • Guide guards and bollards against impact
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Merthyr Tydfil

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Merthyr Tydfil and nearby

Merthyr Tydfil sits in Mid Glamorgan, roughly 7 miles from Rhondda. Whether the job is in the CF47 district or nearby Aberdare, Ebbw Vale and Tonypandy, the survey and quote work the same way.

Rules in Wales

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Your questions answered

Do you cover Merthyr Tydfil?

Yes. Merthyr Tydfil (CF47) is within our Mid Glamorgan coverage, along with nearby Aberdare, Ebbw Vale and Tonypandy.

Do industrial doors need a three-phase supply?

Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.

What safety devices are required?

It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.

Can you fit a door with a pedestrian door in it?

Yes. Wicket doors can be built into many industrial shutters, although they need interlocks so the curtain cannot move while the wicket is open.

Can you fit outside trading hours?

Yes, out-of-hours fitting can be arranged for shops and businesses that cannot close during the day.

How long does it take from order to fitting?

Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.

More shutter services near you

See everything we do in Merthyr Tydfil, across Mid Glamorgan, or read about industrial roller shutter doors.

Get a fixed price in Merthyr Tydfil

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248