Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Brecon

We supply, fit and look after industrial roller shutter doors in Brecon and nearby Merthyr Tydfil, Ebbw Vale and Aberdare, from a single opening to a whole site.

In Brecon, industrial roller shutter doors typically cost £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes. The width of the opening matters more than the height, and electric operation adds to the price.

  • LD3 and nearby
  • Powys
  • Wales
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How industrial roller shutter doors work, and what to ask for

Insulated laths reduce heat loss at loading bays and help temperature-controlled stock. Safety edges, photocells and light curtains protect people and forklifts passing under the door.

Wicket doors and vision panels let staff walk through or see outside without opening the full door. Three-phase motors are common on larger doors, and the electrical supply is checked at survey.

Options we can specify

  • Safety edges, photocells and light curtains
  • Direct-drive and chain motors for heavy use
  • Wicket doors and vision panels
  • Galvanised steel or insulated laths
  • Single or three-phase drives
  • Guide guards and bollards against impact
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Brecon

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Brecon and nearby

For Brecon and the LD3 postcode district we survey, supply, fit and repair. Newtown is about 40 miles away, and we also cover nearby Merthyr Tydfil, Ebbw Vale and Aberdare.

Rules in Wales

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in Wales, new circuits are notifiable under Part P of the Building Regulations as applied in Wales, so the work is self-certified by a registered electrician or notified to building control.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Industrial roller shutter doors: common questions

Do you cover Brecon?

Yes. Send the postcode and we will arrange a survey in Brecon. We also cover nearby Merthyr Tydfil, Ebbw Vale and Aberdare.

What safety devices are required?

It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.

Can you replace just the motor on an old door?

Often yes, if the curtain and barrel are sound. See our motor replacement service.

Do industrial doors need a three-phase supply?

Larger doors often use three-phase motors, but many can run on single-phase. We check your supply at survey and specify the drive to suit.

Do you work with landlords and managing agents?

Yes. We quote, fit and service shutters for landlords, managing agents and facilities teams, including multi-site planned maintenance.

How long does it take from order to fitting?

Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.

Other services in Brecon

See everything we do in Brecon, across Powys, or read about industrial roller shutter doors.

Get a fixed price in Brecon

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248