Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

LPS 1175 high-security shutters in Derbyshire

LPS 1175 high-security shutters across Derbyshire, including Derby, Chesterfield and Long Eaton. Free survey, fixed written price and made-to-measure products.

Guide prices for LPS 1175 high-security shutters in Derbyshire run from £2,795 to £8,495 ex VAT (£3,354 to £10,194 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • England
  • East Midlands
  • From £2,795 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

LPS 1175 high-security shutters in Derbyshire: the essentials

Where the structure around the opening is weak, it may need strengthening for the rating to mean anything in practice. Rated shutters are used on pharmacies, jewellers, phone shops, plant rooms and critical infrastructure. Older Issue 7 ratings ran from SR1 to SR8; roughly, SR1 corresponds to A1, SR2 to B3 and SR3 to C5.

Other test standards such as STS 202 and BS EN 1627 are also used, and we can source products to the one you need. LPS 1175 is a security standard from the Loss Prevention Certification Board, part of BRE.

Specification options

  • Products certified to LPS 1175 Issue 8
  • STS 202 and BS EN 1627 products on request
  • Reinforced guides, curtain and locking
  • Structural fixing checked at survey
  • Ratings from A1 upwards to suit the risk
  • Installed as tested to keep the rating valid
A heavy steel security shutter closed over a stone-faced commercial entrance at night

Guide prices in Derbyshire

LPS 1175 high-security shutters guide prices
OptionEx VATInc VAT
D10 and above, or wider openingsAfter surveyAfter survey
C5 rated shutter, up to 3m wide£4,495 to £8,495£5,394 to £10,194
A1 or B3 rated shutter, up to 3m wide£2,795 to £5,495£3,354 to £6,594

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Derbyshire

We cover Derbyshire from Derby to Chesterfield, Long Eaton and Ilkeston, with 12 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.

Rules in England

Rated security products

LPS 1175 certification belongs to the manufacturer's tested product. We give you the certificate reference with your quote and install the shutter to the tested specification. We do not hold or claim certification ourselves.

Planning permission for shopfront shutters

In England an external shutter on a shopfront is usually treated as development that needs planning permission from the local planning authority, and a listed building also needs listed building consent. Many councils' shopfront design guides favour internal shutters, perforated or open-grille designs and boxes hidden behind the fascia, and some refuse solid external shutters in conservation areas and on main shopping streets.

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

Towns we cover in Derbyshire

How it works

  1. Tell us about the opening

    Send the postcode, a rough size and a photo if you have one, using the form or a call.

  2. Free survey

    We measure, check the structure, power supply and planning position, and talk through options.

  3. Written fixed price

    You get a written quote with the product, finish, controls and price before anything is ordered.

  4. Made, fitted and handed over

    The shutter is made to measure, fitted, commissioned and handed over with its documents.

Before you book in Derbyshire

What does an LPS 1175 rating like B3 mean?

In Issue 8, the letter is the threat level, meaning the tools and number of attackers the product was tested against, and the number is the minimum delay in minutes. B3 means threat level B with at least three minutes' delay.

Does my insurer need a rated shutter?

Some policies specify a minimum rating for certain trades or stock values. Check your policy schedule, or send it to us and we will match the product to it.

Do you hold LPCB certification?

The certification belongs to the manufacturer's tested shutter, not to us. We supply certified products, give you the certificate reference with the quote, and install them to the tested specification.

Do your guide prices include VAT?

Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.

What details help you quote quickly?

The postcode, the approximate width and height of the opening, whether you want manual or electric operation, and a photo of the frontage.

Other services in Derbyshire

See everything we do in Derbyshire, or read about LPS 1175 high-security shutters.

Get a fixed price in Derbyshire

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248