Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Industrial roller shutter doors in Derbyshire

We supply, fit and maintain industrial roller shutter doors throughout Derbyshire: Derby, Chesterfield and Long Eaton and the towns in between.

Guide prices for industrial roller shutter doors in Derbyshire run from £2,495 to £11,995 ex VAT (£2,994 to £14,394 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • England
  • East Midlands
  • From £2,495 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How industrial roller shutter doors work, and what to ask for

Timers, induction loops and push-button stations can be added for busy loading bays. Three-phase motors are common on larger doors, and the electrical supply is checked at survey. Industrial doors are sized for vehicle access, often 4m to 6m wide or more, with heavier curtains and drives.

Direct-drive motors mounted on the end plate are typical on large doors because they handle heavy curtains and frequent cycles. Safety edges, photocells and light curtains protect people and forklifts passing under the door.

Options we can specify

  • Wicket doors and vision panels
  • Guide guards and bollards against impact
  • Direct-drive and chain motors for heavy use
  • Push-button, pull-cord, loop or remote control
  • Wind locks and deep guide rails
  • Single or three-phase drives
A steel industrial roller shutter door half open in a warehouse loading bay

Guide prices in Derbyshire

Industrial roller shutter doors guide prices
OptionEx VATInc VAT
Large warehouse door, 6m and over£5,995 to £11,995£7,194 to £14,394
Loading bay door 4m to 6m wide£4,495 to £8,995£5,394 to £10,794
Industrial door up to 4m x 4m, electric£2,495 to £5,995£2,994 to £7,194

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Derbyshire

We cover Derbyshire from Derby to Chesterfield, Long Eaton and Ilkeston, with 12 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.

Rules in England

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

Towns we cover in Derbyshire

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Before you book in Derbyshire

Can you fit a door with a pedestrian door in it?

Yes. Wicket doors can be built into many industrial shutters, although they need interlocks so the curtain cannot move while the wicket is open.

How often should an industrial door be serviced?

Busy doors are usually serviced at least once or twice a year, and more often where they cycle many times a day. The manufacturer's instructions and your risk assessment set the frequency.

What safety devices are required?

It depends on the risk assessment. Doors that close automatically or where people and vehicles pass usually need a safety edge, photocells or a light curtain, and force testing on commissioning.

What warranty do I get?

Products carry the manufacturer's warranty, and the warranty for your shutter is set out in your quote.

Can I get a quote from photos?

Photos and approximate sizes let us give you a guide price quickly. A survey is still needed before a shutter is made, because it is built to exact measurements.

Other services in Derbyshire

See everything we do in Derbyshire, or read about industrial roller shutter doors.

Get a fixed price in Derbyshire

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248