Security roller shutters in Gwynedd
Security roller shutters for shops, offices and commercial units in Gwynedd. We work in Bangor (Gwynedd), Holyhead and Caernarfon, with prices confirmed in writing before work starts.
Guide prices for security roller shutters in Gwynedd run from £945 to £3,595 ex VAT (£1,134 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.
- Wales
- 3 towns covered
- From £945 + VAT
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
Security roller shutters in Gwynedd: the essentials
A powder-coated finish in a RAL colour lets the shutter match a shopfront or cladding instead of standing out in bare metal. The shutter box can sit outside the opening, behind a fascia or inside the building, which affects both appearance and planning. Insulated double-skin laths reduce heat loss and noise through the opening, which helps unheated units and stock rooms.
Every shutter is made to the measured opening, so the box, guides and curtain are sized for your frontage rather than cut from stock. Most commercial shutters are now electric, with a tube or direct-drive motor, a key switch and a manual override for power cuts.
What's included
- Aluminium or galvanised steel laths, single or double-skin
- Safety edge or photocells where the risk assessment calls for them
- External, behind-fascia or internal shutter box
- Manual push-up, hand-crank or electric operation
- Powder coating to a RAL colour of your choice
- LPS 1175 rated options for higher-risk premises
Guide prices in Gwynedd
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Electric insulated shutter in a RAL colour, up to 3m | £2,145 to £3,595 | £2,574 to £4,314 |
| Electric shutter, opening up to 3m wide | £1,495 to £2,795 | £1,794 to £3,354 |
| Manual shutter, opening up to 2.5m wide | £945 to £1,795 | £1,134 to £2,154 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering Gwynedd
We cover Gwynedd from Bangor (Gwynedd) to Holyhead and Caernarfon, with 3 towns listed below. Planning decisions for external shutters sit with your local council in Wales, and we check the position at survey.
Rules in Wales
Planning permission for shopfront shutters
In Wales an external shopfront shutter normally needs planning permission from your county or county borough council, or the national park authority, and a listed building also needs listed building consent. Welsh councils' design guidance often prefers internal or open-pattern grilles to solid shutters, particularly in conservation areas.
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in Wales, new circuits are notifiable under Part P of the Building Regulations as applied in Wales, so the work is self-certified by a registered electrician or notified to building control.
How it works
Tell us about the opening
Send the postcode, a rough size and a photo if you have one, using the form or a call.
Free survey
We measure, check the structure, power supply and planning position, and talk through options.
Written fixed price
You get a written quote with the product, finish, controls and price before anything is ordered.
Made, fitted and handed over
The shutter is made to measure, fitted, commissioned and handed over with its documents.
Security roller shutters: common questions
Do electric shutters still work in a power cut?
Electric shutters are fitted with a manual override, usually a hand crank or a release, so the shutter can be opened or closed without power.
How long does a roller shutter take to fit?
Most single shopfront shutters are fitted in a day once they have been made. Wider frontages, steel-framed openings or new power supplies can add time, and we confirm the installation day with your quote.
Should I choose aluminium or steel?
Aluminium is lighter, quieter and resists corrosion, so it suits most shops and offices. Galvanised steel is heavier and harder to cut through, so it is often chosen for industrial units and higher-risk premises.
What warranty do I get?
Products carry the manufacturer's warranty, and the warranty for your shutter is set out in your quote.
Will you take away my old shutter?
Yes. Removal and disposal of an old shutter is included when we quote for a replacement.
Other services in Gwynedd
- Shutter motor replacement in Gwynedd
- Home security shutters in Gwynedd
- Manual roller shutters in Gwynedd
- Electric roller shutters in Gwynedd
- Fire shutter servicing & drop tests in Gwynedd
- Roller shutter installation in Gwynedd
- Perforated & punched shutters in Gwynedd
- Roller shutter repairs in Gwynedd
- LPS 1175 high-security shutters in Gwynedd
See everything we do in Gwynedd, or read about security roller shutters.
Get a fixed price in Gwynedd
Free survey, made-to-measure shutters and a written quote before any work starts.