Security roller shutters in Powys
We supply, fit and maintain security roller shutters throughout Powys: Newtown, Brecon and Welshpool and the towns in between.
Guide prices for security roller shutters in Powys run from £945 to £3,595 ex VAT (£1,134 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.
- Wales
- 4 towns covered
- From £945 + VAT
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
Choosing security roller shutters for premises in Powys
Insulated double-skin laths reduce heat loss and noise through the opening, which helps unheated units and stock rooms. Most commercial shutters are now electric, with a tube or direct-drive motor, a key switch and a manual override for power cuts. Electric shutters are commissioned with safety checks and a handover pack, so you have the paperwork for your records and your insurer.
Every shutter is made to the measured opening, so the box, guides and curtain are sized for your frontage rather than cut from stock. Aluminium laths keep the curtain light and quiet, while galvanised steel adds weight and resistance for higher-risk premises.
What's included
- Solid, perforated, punched or vision laths
- Powder coating to a RAL colour of your choice
- Manual override for power cuts on electric shutters
- Aluminium or galvanised steel laths, single or double-skin
- Manual push-up, hand-crank or electric operation
- Safety edge or photocells where the risk assessment calls for them
Guide prices in Powys
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Electric insulated shutter in a RAL colour, up to 3m | £2,145 to £3,595 | £2,574 to £4,314 |
| Electric shutter, opening up to 3m wide | £1,495 to £2,795 | £1,794 to £3,354 |
| Manual shutter, opening up to 2.5m wide | £945 to £1,795 | £1,134 to £2,154 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering Powys
We cover Powys from Newtown to Brecon, Welshpool and Llandrindod Wells, with 4 towns listed below. Planning decisions for external shutters sit with your local council in Wales, and we check the position at survey.
Rules in Wales
Planning permission for shopfront shutters
In Wales an external shopfront shutter normally needs planning permission from your county or county borough council, or the national park authority, and a listed building also needs listed building consent. Welsh councils' design guidance often prefers internal or open-pattern grilles to solid shutters, particularly in conservation areas.
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in Wales, new circuits are notifiable under Part P of the Building Regulations as applied in Wales, so the work is self-certified by a registered electrician or notified to building control.
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Security roller shutters: common questions
Do electric shutters still work in a power cut?
Electric shutters are fitted with a manual override, usually a hand crank or a release, so the shutter can be opened or closed without power.
How long does a roller shutter take to fit?
Most single shopfront shutters are fitted in a day once they have been made. Wider frontages, steel-framed openings or new power supplies can add time, and we confirm the installation day with your quote.
Can a roller shutter be fitted inside the shop?
Yes. Internal shutters sit behind the glazing, which protects the stock and usually avoids external planning issues, although the glass itself is left exposed.
Can you fit outside trading hours?
Yes, out-of-hours fitting can be arranged for shops and businesses that cannot close during the day.
Are your prices fixed?
Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.
Other services in Powys
- Shutter motor replacement in Powys
- Garage roller doors in Powys
- Counter & hatch shutters in Powys
- Roller grilles in Powys
- Steel roller shutters in Powys
- Fire shutters in Powys
- Shutter servicing & maintenance in Powys
- Industrial roller shutter doors in Powys
- Fire shutter servicing & drop tests in Powys
See everything we do in Powys, or read about security roller shutters.
Get a fixed price in Powys
Free survey, made-to-measure shutters and a written quote before any work starts.