Steel roller shutters in Powys
Steel roller shutters for shops, garages and industrial units in Powys. We work in Newtown, Brecon and Welshpool, with prices confirmed in writing before work starts.
Guide prices for steel roller shutters in Powys run from £1,095 to £5,195 ex VAT (£1,314 to £6,234 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.
- Wales
- 4 towns covered
- From £1,095 + VAT
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
What to know about steel roller shutters in Powys
Galvanised steel laths are zinc coated to protect against rust, and can be powder coated on top. Industrial steel doors can include a wicket door so people can enter without raising the whole curtain. Steel curtains are heavier, so they are paired with stronger motors, springs or crank gearboxes.
Steel shutters can be insulated with a double-skin lath where heat loss through the opening matters. Deep steel guide rails and wind locks keep wide steel curtains in place in high winds.
What's included
- Deep guide rails and wind locks for wide openings
- Stronger motors, springs and gearboxes
- Manual, crank or electric operation
- Galvanised steel laths, single or double-skin
- Bottom-rail locks and anti-lift
- Powder coating available over galvanising
Guide prices in Powys
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Powder-coated steel shutter, electric, 4m to 6m | £2,595 to £5,195 | £3,114 to £6,234 |
| Galvanised steel shutter, electric, up to 4m | £1,795 to £3,395 | £2,154 to £4,074 |
| Galvanised steel shutter, manual, up to 3m | £1,095 to £1,995 | £1,314 to £2,394 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering Powys
We cover Powys from Newtown to Brecon, Welshpool and Llandrindod Wells, with 4 towns listed below. Planning decisions for external shutters sit with your local council in Wales, and we check the position at survey.
Rules in Wales
Planning permission for shopfront shutters
In Wales an external shopfront shutter normally needs planning permission from your county or county borough council, or the national park authority, and a listed building also needs listed building consent. Welsh councils' design guidance often prefers internal or open-pattern grilles to solid shutters, particularly in conservation areas.
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in Wales, new circuits are notifiable under Part P of the Building Regulations as applied in Wales, so the work is self-certified by a registered electrician or notified to building control.
How it works
Tell us about the opening
Send the postcode, a rough size and a photo if you have one, using the form or a call.
Free survey
We measure, check the structure, power supply and planning position, and talk through options.
Written fixed price
You get a written quote with the product, finish, controls and price before anything is ordered.
Made, fitted and handed over
The shutter is made to measure, fitted, commissioned and handed over with its documents.
Your questions answered
Is steel more secure than aluminium?
Generally yes. Steel laths are harder to cut and dent, which is why steel is used for industrial and higher-risk premises. For independently tested resistance, look for an LPS 1175 rating.
Will a steel shutter rust?
Galvanising protects the steel, and powder coating adds a further layer. Scratches and damage should be touched up so moisture cannot reach bare metal.
Can a steel shutter have a door in it?
Yes, industrial steel shutters can include a wicket door so people can enter without raising the whole curtain.
Do your guide prices include VAT?
Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.
Do you repair shutters fitted by other companies?
Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.
Other services in Powys
- Roller shutter installation in Powys
- Fire shutters in Powys
- Manual to electric conversion in Powys
- Shutter replacement in Powys
- LPS 1175 high-security shutters in Powys
- Aluminium roller shutters in Powys
- Perforated & punched shutters in Powys
- Manual roller shutters in Powys
- Security roller shutters in Powys
See everything we do in Powys, or read about steel roller shutters.
Get a fixed price in Powys
Free survey, made-to-measure shutters and a written quote before any work starts.