Roller shutter repairs in Dartford
We cover Dartford and nearby Bexley, Swanley and Welling for roller shutter repairs, on shutters other companies fitted as well as our own.
Guide prices for roller shutter repairs in Dartford run from £90 to £695 ex VAT (£108 to £834 inc VAT), depending on the fault, the parts needed and access.
- DA1 and nearby
- Kent
- England
Book a visit
Tell us what the shutter is doing. We confirm the price before an engineer visits.
How roller shutter repairs work, and what to ask for
Repeated faults are often caused by misaligned guides or an undersized motor, which we flag on the visit. A shutter that drops or creeps when stopped needs urgent attention, as the brake or spring may be failing.
Motor faults can be a failed motor, a tripped limit setting, a faulty key switch or a power issue, which is diagnosed on site. Damaged laths can usually be cut out and replaced individually rather than replacing the whole curtain.
What's included
- Damaged lath replacement
- Key switch, remote and receiver repairs
- Safety checks after every repair
- Guide, bearing and end plate repairs
- Motor, limit and control faults
- Curtains refitted into guides
Guide prices in Dartford
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Tube motor replacement | £345 to £695 | £414 to £834 |
| Key switch, control box or remote | £120 to £345 | £144 to £414 |
| Replace damaged laths | £145 to £595 | £174 to £714 |
| Spring or barrel work | £195 to £445 | £234 to £534 |
| Curtain refitted into its guides | £120 to £280 | £144 to £336 |
| Service and adjust, single shutter | £90 to £180 | £108 to £216 |
Your fixed price is agreed before any parts are fitted. Try the quote tool.
Covering Dartford and nearby
For Dartford and the DA1 postcode district we survey, supply, fit and repair. Maidstone is about 18 miles away, and we also cover nearby Bexley, Swanley and Welling.
Rules in England
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
How it works
Describe the fault
Tell us what the shutter is doing, the make if you know it, and send a photo or video.
Engineer visit
An engineer inspects the shutter, finds the cause and makes it safe.
Fixed repair price
You get the repair price before parts are fitted; simple fixes are often done on the first visit.
Tested and reported
Limits and safety devices are checked, and you get a note of what was done.
Before you book in Dartford
Do you cover Dartford?
Yes. Dartford (DA1) is within our Kent coverage, along with nearby Bexley, Swanley and Welling.
My shutter is stuck half open. What should I do?
Stop using it and do not force it, as a jammed curtain or failing spring can drop suddenly. Keep people clear and book a repair.
Is it worth repairing an old shutter?
Often, yes. Motors, springs and laths can be replaced individually. If the curtain or box is badly worn, we will price a replacement so you can compare.
Why does my electric shutter stop halfway?
Common causes are incorrect limit settings, an obstruction, a safety edge fault or a motor overheating. An engineer can diagnose it on site.
Do you repair shutters fitted by other companies?
Yes. We repair and service most makes of roller shutter, grille and industrial door, whoever fitted them.
Do your guide prices include VAT?
Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.
Other services in Dartford
- Fire shutters in Dartford
- Shutter motor replacement in Dartford
- Home security shutters in Dartford
- Manual roller shutters in Dartford
- Shutter replacement in Dartford
- Shutter servicing & maintenance in Dartford
See everything we do in Dartford, across Kent, or read about roller shutter repairs.
Get a fixed price in Dartford
Free survey, made-to-measure shutters and a written quote before any work starts.