Roller shutter repairs in Merseyside
Need roller shutter repairs in Merseyside? We cover Liverpool, Birkenhead and St Helens and the rest of the area. Tell us what the shutter is doing and we will price the visit.
Guide prices for roller shutter repairs in Merseyside run from £90 to £695 ex VAT (£108 to £834 inc VAT) for the common jobs, with the exact figure fixed in writing before work starts.
- England
- North West
- From £90 + VAT
Book a visit
Tell us what the shutter is doing. We confirm the price before an engineer visits.
What to know about roller shutter repairs in Merseyside
We repair most makes and types, from small window shutters to industrial doors. After a repair, powered shutters are checked so the safety devices and limits work correctly. Motor faults can be a failed motor, a tripped limit setting, a faulty key switch or a power issue, which is diagnosed on site.
Damaged laths can usually be cut out and replaced individually rather than replacing the whole curtain. If repair is not economical, we give you a price for a replacement curtain or shutter so you can compare.
Specification options
- Guide, bearing and end plate repairs
- Curtains refitted into guides
- Safety checks after every repair
- Motor, limit and control faults
- Damaged lath replacement
- Spring re-tensioning and replacement

Guide prices in Merseyside
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Tube motor replacement | £345 to £695 | £414 to £834 |
| Key switch, control box or remote | £120 to £345 | £144 to £414 |
| Replace damaged laths | £145 to £595 | £174 to £714 |
| Spring or barrel work | £195 to £445 | £234 to £534 |
| Curtain refitted into its guides | £120 to £280 | £144 to £336 |
| Service and adjust, single shutter | £90 to £180 | £108 to £216 |
Your fixed price is agreed before any parts are fitted. Try the quote tool.
Covering Merseyside
We cover Merseyside from Liverpool to Birkenhead, St Helens and Southport, with 16 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.
Rules in England
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
Towns we cover in Merseyside
- Roller shutter repairs in Liverpool
- Roller shutter repairs in Birkenhead
- Roller shutter repairs in St Helens
- Roller shutter repairs in Southport
- Roller shutter repairs in Wallasey
- Roller shutter repairs in Bootle
- Roller shutter repairs in Bebington
- Roller shutter repairs in Huyton
- Roller shutter repairs in Kirkby
- Roller shutter repairs in Prescot
- Roller shutter repairs in Heswall
- Roller shutter repairs in Maghull
- Roller shutter repairs in Newton-le-Willows
- Roller shutter repairs in Formby
- Roller shutter repairs in Litherland
- Roller shutter repairs in Halewood
How it works
Describe the fault
Tell us what the shutter is doing, the make if you know it, and send a photo or video.
Engineer visit
An engineer inspects the shutter, finds the cause and makes it safe.
Fixed repair price
You get the repair price before parts are fitted; simple fixes are often done on the first visit.
Tested and reported
Limits and safety devices are checked, and you get a note of what was done.
Your questions answered
Why does my electric shutter stop halfway?
Common causes are incorrect limit settings, an obstruction, a safety edge fault or a motor overheating. An engineer can diagnose it on site.
Can you repair a shutter you did not fit?
Yes. We repair most makes and types of roller shutter, grille and industrial door.
How much does a shutter repair cost?
A service and adjustment is typically £90 to £180 + VAT, and a replacement tube motor £345 to £695 + VAT. We confirm a fixed price before starting once the fault is known.
How long does it take from order to fitting?
Shutters are made to measure after the survey, so the lead time depends on the product, colour and any security rating. We confirm it in your quote.
Do your guide prices include VAT?
Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.
Other services in Merseyside
- Manual to electric conversion in Merseyside
- Shutter replacement in Merseyside
- LPS 1175 high-security shutters in Merseyside
- Electric roller shutters in Merseyside
- Industrial roller shutter doors in Merseyside
- Security roller shutters in Merseyside
- Fire shutter servicing & drop tests in Merseyside
- Steel roller shutters in Merseyside
- Perforated & punched shutters in Merseyside
See everything we do in Merseyside, or read about roller shutter repairs.
Get a fixed price in Merseyside
Free survey, made-to-measure shutters and a written quote before any work starts.
