Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248
Security Shutters UK
0800 088 6248Get a quote

Steel roller shutters in Cornwall

Need steel roller shutters in Cornwall? We cover Redruth, Falmouth and St Austell and the rest of the area, with planning and power checked at survey.

Guide prices for steel roller shutters in Cornwall run from £1,095 to £5,195 ex VAT (£1,314 to £6,234 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • England
  • South West
  • From £1,095 + VAT
Get a free quoteCall 0800 088 6248

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

Steel roller shutters in Cornwall: the essentials

Deep steel guide rails and wind locks keep wide steel curtains in place in high winds. Galvanised finishes are practical but plain, so many shopfronts choose a powder-coated colour. Steel curtains are heavier, so they are paired with stronger motors, springs or crank gearboxes.

Steel resists cutting and impact better than foam-filled aluminium, which suits higher-risk premises. Galvanised steel laths are zinc coated to protect against rust, and can be powder coated on top.

Options we can specify

  • Powder coating available over galvanising
  • Wicket doors on industrial doors
  • Galvanised steel laths, single or double-skin
  • Manual, crank or electric operation
  • Bottom-rail locks and anti-lift
  • Insulated steel options
A galvanised steel roller shutter closed on an industrial unit

Guide prices in Cornwall

Steel roller shutters guide prices
OptionEx VATInc VAT
Powder-coated steel shutter, electric, 4m to 6m£2,595 to £5,195£3,114 to £6,234
Galvanised steel shutter, electric, up to 4m£1,795 to £3,395£2,154 to £4,074
Galvanised steel shutter, manual, up to 3m£1,095 to £1,995£1,314 to £2,394

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Cornwall

We cover Cornwall from Truro to Falmouth, St Austell and Truro, with 6 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.

Rules in England

Planning permission for shopfront shutters

In England an external shutter on a shopfront is usually treated as development that needs planning permission from the local planning authority, and a listed building also needs listed building consent. Many councils' shopfront design guides favour internal shutters, perforated or open-grille designs and boxes hidden behind the fascia, and some refuse solid external shutters in conservation areas and on main shopping streets.

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.

Towns we cover in Cornwall

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Steel roller shutters: common questions

Is steel more secure than aluminium?

Generally yes. Steel laths are harder to cut and dent, which is why steel is used for industrial and higher-risk premises. For independently tested resistance, look for an LPS 1175 rating.

Will a steel shutter rust?

Galvanising protects the steel, and powder coating adds a further layer. Scratches and damage should be touched up so moisture cannot reach bare metal.

Are steel shutters noisy?

Single-skin steel is noisier than insulated aluminium. If noise matters, insulated double-skin laths and a well-adjusted motor help.

Are your prices fixed?

Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.

Who carries out the work?

Work is carried out by experienced shutter engineers working for S&K Property Investments and Improvement Ltd, which is the company your contract is with.

Other services in Cornwall

See everything we do in Cornwall, or read about steel roller shutters.

Get a fixed price in Cornwall

Free survey, made-to-measure shutters and a written quote before any work starts.

Get a guide priceCall 0800 088 6248