Steel roller shutters in South Glamorgan
Steel roller shutters across South Glamorgan, including Cardiff, Barry and Penarth. Free survey, fixed written price and made-to-measure products.
Guide prices for steel roller shutters in South Glamorgan run from £1,095 to £5,195 ex VAT (£1,314 to £6,234 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.
- Wales
- 3 towns covered
- From £1,095 + VAT
Get a free quote
Send the postcode and rough size. We reply with a guide price and book a free survey.
Choosing steel roller shutters for premises in South Glamorgan
Galvanised finishes are practical but plain, so many shopfronts choose a powder-coated colour. Deep steel guide rails and wind locks keep wide steel curtains in place in high winds. Steel resists cutting and impact better than foam-filled aluminium, which suits higher-risk premises.
Steel shutters can be insulated with a double-skin lath where heat loss through the opening matters. Steel shutters are the usual base for fire-rated and many LPS 1175 rated shutters.
What's included
- Insulated steel options
- Wicket doors on industrial doors
- Manual, crank or electric operation
- Deep guide rails and wind locks for wide openings
- Stronger motors, springs and gearboxes
- Powder coating available over galvanising
Guide prices in South Glamorgan
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Powder-coated steel shutter, electric, 4m to 6m | £2,595 to £5,195 | £3,114 to £6,234 |
| Galvanised steel shutter, electric, up to 4m | £1,795 to £3,395 | £2,154 to £4,074 |
| Galvanised steel shutter, manual, up to 3m | £1,095 to £1,995 | £1,314 to £2,394 |
Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.
Covering South Glamorgan
We cover South Glamorgan from Cardiff to Barry and Penarth, with 3 towns listed below. Planning decisions for external shutters sit with your local council in Wales, and we check the position at survey.
Rules in Wales
Planning permission for shopfront shutters
In Wales an external shopfront shutter normally needs planning permission from your county or county borough council, or the national park authority, and a listed building also needs listed building consent. Welsh councils' design guidance often prefers internal or open-pattern grilles to solid shutters, particularly in conservation areas.
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in Wales, new circuits are notifiable under Part P of the Building Regulations as applied in Wales, so the work is self-certified by a registered electrician or notified to building control.
Towns we cover in South Glamorgan
How it works
Send the details
Give us the postcode, approximate width and height, and what the shutter is protecting.
We survey the opening
An engineer measures and checks the fixings, power and any planning constraints.
You approve a fixed price
The quote lists the specification and price in writing, so there are no surprises.
We fit and commission
Your shutter is installed, tested and handed over with instructions and paperwork.
Steel roller shutters: common questions
Are steel shutters noisy?
Single-skin steel is noisier than insulated aluminium. If noise matters, insulated double-skin laths and a well-adjusted motor help.
Can a steel shutter have a door in it?
Yes, industrial steel shutters can include a wicket door so people can enter without raising the whole curtain.
Will a steel shutter rust?
Galvanising protects the steel, and powder coating adds a further layer. Scratches and damage should be touched up so moisture cannot reach bare metal.
Who carries out the work?
Work is carried out by experienced shutter engineers working for S&K Property Investments and Improvement Ltd, which is the company your contract is with.
Will you take away my old shutter?
Yes. Removal and disposal of an old shutter is included when we quote for a replacement.
Other services in South Glamorgan
- Roller shutter installation in South Glamorgan
- Shutter motor replacement in South Glamorgan
- Roller grilles in South Glamorgan
- High-speed doors in South Glamorgan
- Shutter replacement in South Glamorgan
- Perforated & punched shutters in South Glamorgan
- LPS 1175 high-security shutters in South Glamorgan
- Shutter servicing & maintenance in South Glamorgan
- Manual roller shutters in South Glamorgan
See everything we do in South Glamorgan, or read about steel roller shutters.
Get a fixed price in South Glamorgan
Free survey, made-to-measure shutters and a written quote before any work starts.