Supply, fit, repair and servicing across the UKFree survey and written quote
0800 088 6248

Aluminium roller shutters in Dumfries & Galloway

Aluminium roller shutters across Dumfries & Galloway, including Dumfries, Stranraer and Newton Stewart. Free survey, fixed written price and made-to-measure products.

Guide prices for aluminium roller shutters in Dumfries & Galloway run from £1,195 to £3,595 ex VAT (£1,434 to £4,314 inc VAT) for the common sizes, with the exact figure fixed in writing after a free survey.

  • Scotland
  • 4 towns covered
  • From £1,195 + VAT

Get a free quote

Send the postcode and rough size. We reply with a guide price and book a free survey.

Enter a UK postcode, such as B43 5DG.

Enter your name.

Enter a phone number we can call.

Check the email address.

We use your details to reply and to arrange your survey and job, including sharing them with the engineers who work for us. See our privacy notice.

How aluminium roller shutters work, and what to ask for

Aluminium curtains roll up tighter than steel, so the shutter box can often be smaller. Perforated aluminium laths are available for frontages where the display needs to stay visible. Foam-filled laths reduce noise and add a little insulation compared with single-skin metal.

Roll-formed aluminium laths are two skins of aluminium with an insulating foam core, which keeps them light. Aluminium does not rust, so it suits coastal towns and exposed frontages.

Specification options

  • Smaller shutter box than steel
  • Roll-formed foam-filled or extruded aluminium laths
  • Powder coated to a RAL colour
  • Lighter curtain for less wear on motors and springs
  • Solid, perforated or vision laths
  • Quieter running than steel
A cut-away of a foam-filled double-skin aluminium shutter lath

Guide prices in Dumfries & Galloway

Aluminium roller shutters guide prices
OptionEx VATInc VAT
Extruded aluminium shutter, up to 3m wide£1,895 to £3,595£2,274 to £4,314
Insulated aluminium shutter in a RAL colour, up to 3m£1,395 to £2,795£1,674 to £3,354
Foam-filled aluminium shutter, up to 3m wide£1,195 to £2,295£1,434 to £2,754

Your fixed price is confirmed in writing after the survey, before anything is ordered. Try the quote tool.

Covering Dumfries & Galloway

We cover Dumfries & Galloway from Dumfries to Stranraer, Newton Stewart and Kirkcudbright, with 4 towns listed below. Planning decisions for external shutters sit with your local council in Scotland, and we check the position at survey.

Rules in Scotland

Planning permission for shopfront shutters

In Scotland fitting an external security shutter to a shopfront normally needs planning permission from the council, and listed building consent if the building is listed. Councils often ask for the box to be concealed and for open or perforated designs rather than solid shutters in conservation areas.

Safety of powered shutters

Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.

Electrical work

Electric shutters are wired to BS 7671, the IET Wiring Regulations. In Scotland electrical work in buildings must also meet the Scottish building standards, and is carried out and certified by a qualified electrician.

How it works

  1. Send the details

    Give us the postcode, approximate width and height, and what the shutter is protecting.

  2. We survey the opening

    An engineer measures and checks the fixings, power and any planning constraints.

  3. You approve a fixed price

    The quote lists the specification and price in writing, so there are no surprises.

  4. We fit and commission

    Your shutter is installed, tested and handed over with instructions and paperwork.

Before you book in Dumfries & Galloway

What is the difference between roll-formed and extruded aluminium?

Roll-formed laths are two thin skins with a foam core, which is light and insulating. Extruded laths are solid profiles, which are heavier and much stronger.

Is aluminium strong enough for a shop?

For most shops and offices, yes, especially extruded aluminium laths. For high-risk premises, galvanised steel or a rated shutter may be recommended.

Will an aluminium shutter dent?

Foam-filled laths can dent under a heavy impact. Extruded aluminium resists denting far better, and damaged laths can be replaced individually.

Do your guide prices include VAT?

Guide prices are shown both excluding VAT and including VAT at the standard rate of 20%. For a home, the price including VAT is what you pay.

Can I get a quote from photos?

Photos and approximate sizes let us give you a guide price quickly. A survey is still needed before a shutter is made, because it is built to exact measurements.

Get a fixed price in Dumfries & Galloway

Free survey, made-to-measure shutters and a written quote before any work starts.