Roller shutter repairs in Hertfordshire
Roller shutter repairs across Hertfordshire, including Watford, Hemel Hempstead and Stevenage, for most makes of shutter and door.
Guide prices for roller shutter repairs in Hertfordshire run from £90 to £695 ex VAT (£108 to £834 inc VAT) for the common jobs, with the exact figure fixed in writing before work starts.
- England
- East of England
- From £90 + VAT
Book a visit
Tell us what the shutter is doing. We confirm the price before an engineer visits.
Roller shutter repairs in Hertfordshire: the essentials
Grinding or squealing usually points to dry or damaged guides, bearings or end plates. After a repair, powered shutters are checked so the safety devices and limits work correctly. Broken or weak springs make manual shutters heavy or impossible to lift, and are replaced or re-tensioned.
A curtain that has jumped out of its guides is one of the most common faults, often after a knock or strong wind. If repair is not economical, we give you a price for a replacement curtain or shutter so you can compare.
What's included
- Safety checks after every repair
- Spring re-tensioning and replacement
- Bottom rail and lock repairs
- Curtains refitted into guides
- Guide, bearing and end plate repairs
- Damaged lath replacement

Guide prices in Hertfordshire
| Option | Ex VAT | Inc VAT |
|---|---|---|
| Tube motor replacement | £345 to £695 | £414 to £834 |
| Key switch, control box or remote | £120 to £345 | £144 to £414 |
| Replace damaged laths | £145 to £595 | £174 to £714 |
| Spring or barrel work | £195 to £445 | £234 to £534 |
| Curtain refitted into its guides | £120 to £280 | £144 to £336 |
| Service and adjust, single shutter | £90 to £180 | £108 to £216 |
Your fixed price is agreed before any parts are fitted. Try the quote tool.
Covering Hertfordshire
We cover Hertfordshire from Watford to Hemel Hempstead, Stevenage and St Albans, with 18 towns listed below. Planning decisions for external shutters sit with your local council in England, and we check the position at survey.
Rules in England
Safety of powered shutters
Powered doors and shutters are treated as machinery. The installer commissions them with a risk assessment, safety devices where the risk calls for them and force checks to BS EN 12453, then hands over a declaration of conformity and maintenance instructions. In workplaces, the employer or whoever controls the premises must keep doors maintained and safe for staff and visitors.
Electrical work
Electric shutters are wired to BS 7671, the IET Wiring Regulations. In homes in England, new circuits are notifiable under Part P of the Building Regulations, so the work is done by a registered electrician who can self-certify it, or notified to building control.
Towns we cover in Hertfordshire
- Roller shutter repairs in Watford
- Roller shutter repairs in Hemel Hempstead
- Roller shutter repairs in Stevenage
- Roller shutter repairs in St Albans
- Roller shutter repairs in Welwyn Garden City
- Roller shutter repairs in Cheshunt
- Roller shutter repairs in Hatfield
- Roller shutter repairs in Bishop's Stortford
- Roller shutter repairs in Borehamwood
- Roller shutter repairs in Hitchin
- Roller shutter repairs in Hoddesdon
- Roller shutter repairs in Letchworth Garden City
- Roller shutter repairs in Harpenden
- Roller shutter repairs in Bushey
- Roller shutter repairs in Hertford
- Roller shutter repairs in Rickmansworth
- Roller shutter repairs in Potters Bar
- Roller shutter repairs in Berkhamsted
How it works
Describe the fault
Tell us what the shutter is doing, the make if you know it, and send a photo or video.
Engineer visit
An engineer inspects the shutter, finds the cause and makes it safe.
Fixed repair price
You get the repair price before parts are fitted; simple fixes are often done on the first visit.
Tested and reported
Limits and safety devices are checked, and you get a note of what was done.
Roller shutter repairs: common questions
Can you repair a shutter you did not fit?
Yes. We repair most makes and types of roller shutter, grille and industrial door.
Is it worth repairing an old shutter?
Often, yes. Motors, springs and laths can be replaced individually. If the curtain or box is badly worn, we will price a replacement so you can compare.
My shutter is stuck half open. What should I do?
Stop using it and do not force it, as a jammed curtain or failing spring can drop suddenly. Keep people clear and book a repair.
Are your prices fixed?
Yes. After the survey you get a written price for the agreed specification, confirmed before anything is ordered or any work starts. If you change the specification, or a hidden problem such as a weak lintel is found during fitting, we price it and agree it with you before carrying on.
Can you fit outside trading hours?
Yes, out-of-hours fitting can be arranged for shops and businesses that cannot close during the day.
Other services in Hertfordshire
- Counter & hatch shutters in Hertfordshire
- Shutter replacement in Hertfordshire
- Garage roller doors in Hertfordshire
- Roller shutter installation in Hertfordshire
- Industrial roller shutter doors in Hertfordshire
- Fire shutter servicing & drop tests in Hertfordshire
- Security roller shutters in Hertfordshire
- Fire shutters in Hertfordshire
- Shutter servicing & maintenance in Hertfordshire
See everything we do in Hertfordshire, or read about roller shutter repairs.
Get a fixed price in Hertfordshire
Free survey, made-to-measure shutters and a written quote before any work starts.
